Roman Blinds One …
Written on January 18, 2012 by admin
One is now ready to hang their Roman Blinds Sydney. By using a 2-by-1-inch batten, one will use angle brackets to hold the batten. After tucking the fabric in by one inch all around, simply stitch it shut. Securing the blind to the batten, line up eyelet screws with the plastic rings and screw them into the batten. Turn the fabric inside out so that the seams are on the inside. Flatten the fabric on the ground and pin it at all angles to make sure the fabric does not move and remains wrinkle-free throughout the process. Then, measure roughly two inches from the top of the window treatment. Mark this area. From here, one will begin measuring for the sectioning of the blinds..
If you enjoyed this post Subscribe to our feed